Dear Amy
not sure If I understod your explanation. I try the other way around:
1.) You can use CBRC20 only for one regulation in one run. Therefore you can display only the results of either TSCA or TSCA 5A tracking
2.) If you select in CBRC20 TSCA then the TSCA results should show up and the TSCA Limits
Regarding;: So a TSCA PU is showing up in the T5A report with the TSCA limits.
this can not be the case (in my opinion) and if so it is either a set up in customizing or a SAP error.
On high level: you have scheduled two "tracking"s (either in the same job or seperate (preferred seperate). SVT should check: Is ther a PO relevant for TSCA if yes this should be analyzed and data will be written to database (if needed) and then you will see the result in CBRC20
I propose the following steps to get clear picture:
1.) Check for one REAL_SUB having data for TSCA and TSCA 5A
2.) execute the filling
3.) Check content of tables CCRCT_EHS_COMP/CCRCT_EHS_REG first
Let us assume an high level example: REAL_SUB contains one SVT relevant data recod in a property of typpe composition e.g. tagged with STANDARD/US). Composition should be on PURE_SUB level
Two Components should be in place. E.g component A with 40% and B with 60 %
CCRCT_EHS_COMP should contaio then "identical" data records like:
Regualtion Material REAL_SUB COmponent Value
TSCA X Y A 40
TSCA X Y B 60
TSCA 5A X Y A 40
TSCA 5A X Y B 60
The check the same for *REG Table. You have prepared data record for two regulaiotns with same "Usage". E.g. TSCA could be 500 T, TSCA A% could be 250 t as limit in the databse.
PLease check this (and my assumptions) and rpvoide feedback about your results
C.B.